News

Sucker rod pumping is the most common artificial lift method both domestically and internationally: Venezuela: 70% of oil wells are pumped using rod pumps. The United States: 85% of oil wells are pumped using rod pumps. Russia: Over 55% of oil wells are pumped using rod pumps. China: Over 80% of oil wells use sucker rod pumps, accounting for 75% of total oil production. Rod pumps play a crucial role in my country's oil extraction.

The importance of the sucker rod pump: Although it accounts for a small proportion of the total cost and weight of a complete rod-operated pumping unit, it is a key component determining the technical and economic indicators of the unit. The operating condition of the sucker rod pump significantly affects the service life of the surface pumping unit and sucker rod. Factors such as plunger jamming, delayed opening and closing of pump valves, and excessive pump clearance volume can all cause overload and malfunction of the pumping unit and sucker rod, leading to well collapse. A schematic diagram of the structure and operation of a sucker rod pump is shown in the figure.

Artificial lifting is a process where, when the natural energy of the formation is insufficient to sustain natural flow production, or although natural flow is possible but the production rate is insufficient, mechanical equipment is installed in the wellbore to work on the fluid, allowing it to flow to the surface.

Recently, while studying the fundamentals of oil exploration, we were once again struck by the complexity of the oil production chain: from how oil and gas are formed, stored, and migrated, to their final extraction through the wellhead, each step requires extensive geological and engineering expertise. In this entire process, once reservoir conditions are confirmed and production begins, one of the most critical pieces of equipment downhole is the Sucker Rod Pump.

Petroleum continues to occupy a crucial position in the global energy structure. Oil and natural gas are not only major energy sources but also the most important basic raw materials for the chemical industry, widely used in the production of thousands of materials such as plastics, rubber, coatings, and synthetic fibers. Therefore, the stable and efficient extraction of oil from the ground is a key focus for oilfields worldwide.

The applicable conditions for API sucker rod pumps require a comprehensive consideration of multiple parameters, including well depth, production rate, well structure, and fluid characteristics. The core suitable scenarios can be summarized as conventional production environments of "medium-deep, low-to-medium production, vertical or slightly deviated wells." According to API SPEC 11AX specifications and industry practice, the specific applicable boundaries are as follows:

In global oil extraction, the rod pump is one of the most crucial artificial lift systems, widely deployed in onshore oil fields, heavy oil wells, deep wells, and highly corrosive environments. To improve well production, reduce well shutdowns, and extend pump lifespan, selecting a high-quality, API 11AX-compliant sucker rod pump is essential. Dongsheng, a leading domestic manufacturer of sucker rod pumps, leverages its factory-direct sales, stable quality, and technical expertise in partnership with SLB to continuously provide global customers with highly reliable API pump, downhole pump, and oil well pump solutions.

I. The Crucial Role of Rod Pump Barrels in the Oil Extraction Industry Oil, as a vital resource for global economic development, has long held a pivotal position in the energy structure. Whether in transportation, chemical raw materials, or power generation, oil and its derivatives remain an indispensable energy source for modern society. Despite the rapid development of new energy technologies, oil extraction will continue to be a crucial pillar of global energy supply in the foreseeable future.

Why are oil rod pumps so crucial and irreplaceable in oil production? In the middle and late stages of oilfield development, formation energy declines, and crude oil can no longer flow to the surface on its own. Mechanical means must be used to lift the oil. Among all mechanical oil production methods, rod pumping is the most mature and widely used, accounting for over 60% of global onshore oil well production. Without the economical and reliable mechanical lift methods represented by oil rod pumps, sustained and stable commercial production would be impossible. So, how does this globally used rod pump system continuously lift crude oil to the surface?

In oil extraction operations, rod pump barrels is the core component of the tubing pump, and the operating status directly determines the oil recovery efficiency and operating cost. Once rod pump barrels fail, it will not only cause oil production to be interrupted, but may also cause complex underground problems, increasing the difficulty of maintenance and economic losses.